EddyBits delivers IoT for cold storage and commercial refrigeration across India — multi-zone temperature and humidity sensing, door open/close tracking, compressor performance, and refrigerant pressure. Purpose-built as an IoT solution for cold drink equipment, IoT refrigeration for beverages, and IoT refrigeration for the food industry, with FSSAI/FDA-ready digital audit trails for cold chain monitoring.
A real cold room and its condenser unit, sensors live on the door and compressor, live readings on screen, data streaming to the cloud and every connected device as it runs.
Tracks temperature continuously across every storage zone, flagging a deviation the moment it drifts out of the safe range — not at the next manual walk-through.
Reads relative humidity and dew point continuously, warning of condensation risk before it damages product or triggers mold growth in the storage zone.
Logs every door opening with duration and timestamp, so a door propped open too long shows up as an event, not just a slow temperature climb an hour later.
Tracks compressor on/off cycles and runtime hours automatically, flagging fault codes and efficiency drift that usually precede a full compressor failure.
Monitors high/low side refrigerant pressure continuously, catching the slow pressure drop that signals a leak long before the cold room stops holding temperature.
Rolls up energy usage per storage unit into a real cost figure, surfacing efficiency trends that usually mean it is time to service the compressor or check seals.
Tracks defrost frequency, duration, and the temperature rise each cycle causes, so an abnormal defrost pattern is caught before it compromises stored product.
Reads ambient temperature outside the cold room to explain compressor strain — a hot exterior day working harder to hold the same internal setpoint.
Food Safety and Standards Authority of India alignment. Automated temperature logging for critical control points. Reports exportable for regulatory audits and certifications.
For pharma & food exporters. Cold chain integrity verification. Time-temperature index (TTI) compliance. Complete traceability documentation.
Food Safety Management System logs. Every parameter change timestamped. Immutable records for 7+ years. E-signature integration for certifications.
Out-of-range temperatures trigger alerts instantly. Quarantine notification sent to quality teams. Root cause analysis logs for non-conformance tracking.
Real-time zone temperatures across all storage units. Historical trends, daily min/max tracking. Mobile app for on-the-go compliance verification.
AI-based forecasting of equipment failure. Compressor degradation warnings. Maintenance scheduling before breakdowns occur.
Daily temperature logs, FSSAI-formatted reports, monthly compliance summaries. Email delivery to facility managers and compliance officers.
Track kWh consumption per storage unit. Identify inefficiencies (high defrost cycles, temperature drifts). Reduce energy costs by 15-20%.
The full data path from your cold room to your phone, start to finish.
RTD temperature sensors and humidity probes installed in each storage zone and door — no electrical modifications needed, works with legacy refrigeration systems.
A gateway near existing electrical infrastructure aggregates every zone sensor over Modbus/4-20mA and syncs to the cloud every few minutes.
Data transmits with TLS 1.2+ encryption for FSSAI/FDA data security — built for cold rooms and warehouses without reliable Wi-Fi, common on Indian sites.
Every reading is checked against safe-range thresholds in real time, and FSSAI/FDA compliant reports are auto-generated and archived for 10+ years.
A deviation alert reaches the quality team over WhatsApp and SMS the moment it happens — not at the next shift's manual temperature check.
Curious what this looks like on your own cold room?Free site assessment, no commitment — we'll tell you exactly what's feasible.
Get a Free Site AssessmentGeneric IoT monitoring platforms are built for a global market. EddyBits is built specifically around how Indian facilities actually operate.
Most platforms default to email or app push notifications. Ours default to WhatsApp and SMS — the channels facility staff in India actually check first.
Cellular-first connectivity by default, so monitoring doesn't depend on a facility's internet infrastructure — the DG room and generator yard rarely have good Wi-Fi anyway.
Most facilities are live within 48 hours of installation, with a dedicated on-site engineering team handling setup — not a self-install kit shipped in a box.
Multi-zone frozen + refrigerated sections. Loss prevention, product quality assurance, reduced waste.
Vaccine & temperature-sensitive medication storage. GMP compliance. Complete cold chain traceability.
FSSAI/FDA-ready documentation. International shipment compliance. Quality proof for customers.
Blood bank, pathology lab samples. Strict temperature requirements. Audit trail for quality assurance.
High-speed freezing tunnels, storage chambers. Precise temperature control critical for product quality.
Bulk milk cooler monitoring. Prevent spoilage, ensure payment fairness, reduce operational losses.
Wherever a cold chain break means lost or unsafe product, continuous monitoring is the difference between catching it and finding out too late.
Vaccine and drug storage requires provable, continuous compliance, not a spot-checked logbook. FSSAI/FDA-ready digital audit trails give an inspector an immutable, timestamped record on demand.
International cold-chain shipments live or die on documentation. Continuous, exportable temperature and humidity logs are the evidence a buyer or customs authority actually asks for.
Display cases and back-of-store cold rooms often run on different equipment with different failure modes. Multi-zone monitoring covers every zone from one dashboard instead of a separate check per unit.
Dairy products spoil fast once temperature slips out of range. Instant WhatsApp/SMS alerts on a compressor fault or a door left open catch the problem within minutes, not at the next shift walk-through.
Blood banks and vaccine refrigerators hold product that can't simply be reordered. The same continuous logging and instant-alert path used for pharma cold chains applies directly to hospital cold storage.
An IoT for cold storage system uses sensors placed in each zone to track temperature, humidity, door events, and compressor performance in real time, sending instant WhatsApp/SMS alerts and generating FSSAI/FDA compliant digital audit trails automatically.
Yes. Every temperature reading is timestamped and logged continuously, producing an immutable digital audit trail exportable for FSSAI inspections or FDA cold-chain documentation — far stronger evidence than a manual twice-daily logbook.
Yes. The same platform covers IoT for cold drink equipment, IoT refrigeration for beverages, and IoT refrigeration for the food industry — multi-zone sensing works whether it's a walk-in cold room or a beverage cooler line.
Out-of-range temperature or humidity triggers an instant WhatsApp/SMS alert to the quality team, not just email — so a compressor fault or a door left open gets caught within minutes, not at the next shift check.
No. Connectivity is cellular-first by default, so monitoring works even at cold rooms and warehouses with no reliable Wi-Fi — a common condition on Indian industrial sites.
Data is retained for 10+ years for compliance archives, with e-signature integration available for certification workflows.
Multi-point sensors are installed with no electrical modifications needed, and facilities are typically fully live on the dashboard within 48 hours.
What manual temperature checks miss, and how continuous monitoring closes the gap.
Read article → SafetyWhat IoT monitoring covers for fire/safety audits, and what still needs inspection.
Read article → FinanceA worked payback-period calculation including a cold storage unit.
Read article → InfrastructureWhy cellular-first connectivity matters for cold rooms with no reliable Wi-Fi.
Read article →Protect your cold chain and stay FSSAI-compliant with automated temperature and humidity monitoring — your first line of defense against product loss. Fill in your details and an IoT specialist will reach out within one business day.
Or WhatsApp Us DirectlyAn IoT specialist will reach out within one business day.